Note:For details on entering/editing text, refer to Facsimile User’s Guide.5. To finish editing addresses, press the Back key.6. Press the u or d key to select FINISH, and then press the Select key.Deleting a Specified Destination AddressA specified destination address (e-mail address, FTP address or SMB address) can be deleted.Note:Changes made with this procedure will not be applied to the original data (speed dial destination, groupdial destination, etc.).1. In the main screen (Scan mode), press the u or d key to select the current data destination setting,and then press the Select key.2. To delete an e-mail address, press the u or d key to select CHECK/EDIT, and then press the Selectkey. Then, press the u or d key to select the address to be deleted. To delete an FTP address or SMBaddress, continue with step 3.3. Press the Stop/Reset key.4. Press the u or d key to select YES, and then press the Select key.The selected address is deleted.Note:If all specified addresses are deleted, the main screen is displayed.5. To delete another address, repeat the procedure from step 2.6. To finish deleting addresses, press the Back key.7. Press the u or d key to select FINISH, and then press the Select key.Registering/Editing AddressesAddresses can be registered/edited in the favorite list, as speed dial destinations or as group dialdestinations.Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s GuideUsing the Scanner 154
