Epson AcuLaser CX37DN Series User Manual

Also see for aculaser cx37 series: Setup guide Reference guide Quick guide Safety information guide

Contents

Chapter 4Using the Printer DriverSelecting Driver Options/Defaults (for Windows)Before you start working with your printer, you are advised to verify/change the default driversettings. Also, in case you have options installed, you should “declare” the options in the driver.1. Choose the driver’s properties.2. If you have installed options, proceed with the next step. Otherwise, skip to step 9.3. Select the Configure tab.4. Check that the installed options are correctly listed. If not, proceed with the next step. Otherwise,continue with step 8.5. Click the Refresh to automatically configure installed options.Note:The Refresh is available only if bi-directional communication is available with the printer; otherwiseit is grayed out.If Windows Vista or Server 2008 is being used, Refresh can also be clicked when the machine isconnected via USB.6. From the Device Options list, select an option, one at a time, and then select Enable or Disablefrom the Settings menu.Note:❏ If Printer Memory is selected, select 256MB or 768MB according to the installed memory. Thefactory default setting is 256MB.❏ This printer does not support CompactFlash cards.7. Click Apply.Note:Depending on the version of the operating system, Apply may not appear. If this is the case, continuewith the next step.Epson AcuLaser CX37 Series Printer/Copier/Scanner User’s GuideUsing the Printer Driver 115