Printer ProblemsYou can solve most printer problems by followinjg the instructionsin your printer manual. If you have just connectedthe printer, firstcheck that the pritner has power and is correctly connected to thecomputer. See Chapter 4 for instructions on connecting a printer.(The printer manual also gives instructions on cable connections.)If you have a serial printer or if you have problems feeding paper,check the printer manual for the correct DIP switch settings. Referto your printer documentation to see whether you need to use theMODE command (described in the MS-DOS manual) to match theserial settings.M e m o r y M o d u l e P r o b l e m sIf you have added extra memory to your system, and that memoryis not operating properly, check the following:1. Make sure the Setup program is displaying the correct amountof memory. See Chapter 5 for instructions.2. Did you insert memory module correctly? See "Installing aMemory Module” in Chapter 4.3. Have you defined the memory properly in your CONFIG.SYSfile? See your MS-DOS manual for more information.A-12 Troubleshooting
