Epson 3000 Quick Setup Manual

Also see for ActionTower 3000 Computer: Cartridges Replacement User guide User guide User guide Read this first

Contents

Quick SetupBefore using the projector, make sure you read the safety instructions in theonline User’s Guide.Note: These illustrations show the PowerLite Home Cinema 3600e, but theinstructions are the same for the PowerLite Home Cinema 3000/3500/3510unless otherwise noted.Connect the projectorChoose from the following connections. For additional connection types, seethe online User’s Guide.Note: To access the rear ports on the PowerLite Home Cinema 3600e, removethe cable cover by using coins or your fingernails to lift up and out on the gapsat the bottom of the cable cover.Video deviceConnect up to 4 video devices and use the Source buttons on the remotecontrol or the button on the projector to switch between them.Component video cableRCA video cableHDMI cableMobile media device (PowerLite Home Cinema3500/3510/3600e)Connect tablets, smartphones, and other devices that support the MHL™standard to the HDMI 1/MHL port using a MHL compatible cable.MHL cableNote: Some devices may require an adapter or may not require an MHLcable. Not all features or functions may be supported. Check your device’sdocumentation for more information.WirelessHD (PowerLite Home Cinema 3600e)Follow these steps to set up the included WirelessHD Transmitter.1 Place the transmitter within 32 feet (10 m) of the projector. Make sure thefront of the transmitter faces the front of the projector. See the onlineUser’s Guide for more information on the WirelessHD transmission range.Note: Do not place the transmitter on a metal surface, as this mayinterfere with the signal. Make sure there are no obstructions betweenthe transmitter and the projector.2 Plug the AC adapter into the transmitter and a wall outlet.3 Connect the HDMI cables to your video input devices and the HDMI portson the side and back of the WirelessHD Transmitter. You can connect upto five input devices to the transmitter. See “Viewing WirelessHD content”for information on switching between input sourcesNote: You can connect tablets, smartphones and other devices thatsupport the MHL standard to the HDMI port on the side of theWirelessHD Transmitter. Some devices may require an adapter or may notrequire an MHL cable. Not all features or functions may be supported.Check your device’s documentation for more information.4 To use the transmitter as a pass-through device to a television or otherdisplay, connect an HDMI cable to the display device and the HDMI outputport on the rear of the transmitter. See “Viewing WirelessHD content” forinformation on switching between wireless and wired display modes.Connect audioBuilt-in speaker (PowerLite Home Cinema3500/3510/3600e)The projector has a built-in speaker that can play audio from a connected videosource (DVD player, streaming device, etc.) using an HDMI connection. If you donot use an HDMI connection, you can connect your device’s audio output to theprojector’s audio input.HDMI cableAudio cableAudio Out port (PowerLite Home Cinema3500/3510/3600e)You can connect the projector to external self-powered speakers through theAudio Out port.3.5 mm stereo minicableNote: You can also connect external self-powered speakers to the Optical Outport on the WirelessHD Transmitter (PowerLite Home Cinema 3600e).External speakersConnect your device’s audio output to your home theater receiver or poweredspeakers.Note: When outputting sound through an external source, you may need toreduce the projector volume to zero or make sure that the correct audio outputis selected on your device to prevent duplicate sound from being heard fromthe projector (PowerLite Home Cinema 3500/3510/3600e).HomSPowExNoteon coTu12345Ad1PowerLite® Home Cinema 3000/3500/3510/3600e

/ 4

Related manuals for Epson ActionTower 3000 Computer