Electrolux WC170BKMZ Installation, Use And Maintenance Instructions

34Machine space limitsA suitable space must be left around the machine (for opera-tions, maintenance, etc.). This space must be increased in caseof use and/or transfer of other equipment and/or means or ifexit routes are necessary inside the workplace. For informationregarding distances from any other machines present in theroom (in fact, close proximity can create problems of conden-sate forming on the walls of the appliance), also taking intoconsideration the space needed for door opening.PositioningDisposal of packingThe packing must be disposed of in compliance with the cur-rent regulations in the country where the appliance is used.All the packing materials are environmentally friendly. They canbe safely kept, recycled or burned in an appropriate waste in-cineration plant. Recyclable plastic parts are marked as follows:PEpolyethylene: outer wrapping,instructions bagPPpolypropylene: strapsPSpolystyrene foam: corner protectorsThe parts in wood and cardboard can be disposed of, re-specting the current regulations in the country where themachine is used.ATTENTIONKeep ventilation openingsin the appliance´s cabinetor in the built in structureclear of obstruction.Electrical connectionWiring and connections in power supply systems must been allapplicable (local and national) electrical codes. Consult thesecodes lengths and sizes prior to cabinet installation.This device complies with relevant EU directives includingLow Voltage Directive 2014/35/EU and ElectromagneticCompatibility Directive 2014/30/EU.The socket should be freely accessible.Connect the appliance only to 220/240 V / 50Hz alternatingcurrent via a correctly installed earthed socket.The socket must be fused with a 10-13 A fuse.If the appliance is to be operated in a non-European country,check on the rating plate whether the indicated voltage andcurrent type correspond to the values of your mains supply.Information regarding voltage, current or power aregiven on the rating plate.The power cord may be replaced by a technician only.The rating plate provides various technical information as wellas type and serial number.ATTENTIONIf the power cable is dam-aged it must be replacedby the After-Sales Serviceor in any case by qualifiedpersonnel, in order preventany risk.Connection to the power supply must be carried out incompliance with the regulations and provisions in force inthe country of use.ATTENTIONWork on the electrical sys-tems must only be carriedout by a qualified electri-cian.To connect 220/240 V / 50Hz alternating current via a correctlyinstalled earthed socket.