Problem Possible cause RemedyThe fuse is released. Make sure that the fuse isthe cause of the malfunc-tion. If the fuse releasesagain and again, contact aqualified electrician.Burner cap and crown areplaced incorrectly.Place the burner cap andcrown correctly.The flame extinguishes im-mediately after ignition.Thermocouple is not heatedup sufficiently.After lightning the flame,keep the knob pushed forequal or less than 10 sec-onds.The flame ring is uneven. Burner crown is blockedwith food residues.Make sure that the injectoris not blocked and theburner crown is clean.7.2 If you cannot find asolution...If you cannot find a solution to theproblem yourself, contact your dealer oran Authorised Service Centre. Give thedata from the rating plate. Make sure, youoperated the hob correctly. If not theservicing by a service technician or dealerwill not be free of charge, also during thewarranty period. The instructions aboutthe Service Centre and conditions ofguarantee are in the guarantee booklet.ENGLISH 11