Electrolux 36" Installation Instructions Manual

Also see for 36" Ceramic: Installation, use & care guide Installation instructions Use and care guide Installation instructions

Contents

GAS COOKTOP INSTALLATION INSTRUCTIONS(For 36" Models with 6 Sealed Burners)3Important Notes to the Installer1. Read all instructions contained in these installationinstructions before installing the cooktop.2. Remove all packing material before connecting theelectrical supply to the cooktop.3. Observe all governing codes and ordinances.4. Be sure to leave these instructions with the consumer.5. Note: For operation at 2000 ft. elevations above seelevel, appliance rating shall be reduced by 4 percentfor each additional 1000 ft.Important Note to the ConsumerKeep these instructions with your Use and Care Guide forfuture reference.Depth Adjustment Filler Kit #903051-9010This cooktop is designed to replace existing unit. If thedepth of your countertop opening is bigger than 7¼" (18.4cm) and less than 8½" (21.6 cm) you can order a free fillerkit #903051-9010 by calling Service Center at 1-877-4ELECTROLUX (1-877-435-3287).Optional Items Available:• A 9" (22.9cm) Stainless Steel Backsplash Kit#903048-9010• A Black Knobs Kit #903049-9100Those kits can be order through the Service Center at1-877-4ELECTROLUX (1-877-435-3287). However all costrelated to those kits will be at customer charges.IMPORTANT SAFETYINSTRUCTIONSInstallation of this cooktop must conform with local codesor, in the absence of local codes, with the National FuelGas Code ANSI Z223.1/NFPA54—latest edition in theUnited States, or in Canada, with the Canadian Fuel GasCode, CAN/CGA B149 and CAN/CGA B149.2.• When installed in a manufactured (mobile) homeinstallation must conform with the Manufactured HomeConstruction and Safety Standard, title 24 CFR, part3280 [Formerly the Federal Standard for Mobile HomeConstruction and Safety, title 24, HUD (part 280)] or,when such standard is not applicable, the Standard forManufactured Home Installation, ANSI/NCSBCS A225.1or with local codes where applicable.This cooktop has been design certified by InternationalApproval Services (I.A.S). As with any appliance usinggas and generating heat, there are certain safetyprecautions you should follow. You will find them in theUse and Care Guide, read it carefully.• Be sure your cooktop is installed and groundedproperly by a qualified installer or servicetechnician.• This cooktop must be electrically grounded inaccordance with local codes or, in their absence,with the National Electrical Code ANSI/NFPA No.70—latest edition in the United States, or inCanada, with the Canadian Electrical Code, CSAC22.1 Part 1.• The burners can be lit manually during anelectrical power outage. To light a burner, hold alit match to the burner head, then slowly turn theSurface Control knob to LITE. Use caution whenlighting burners manually.• Do not store items of interest to children incabinets above the cooktop. Children could beseriously burned climbing on the cooktop to reachitems.• To eliminate the need to reach over the surfaceburners, cabinet storage space above the burnersshould be avoided.• Adjust surface burner flame size so it does notextend beyond the edge of the cooking utensil.Excessive flame is hazardous.• Never use your cooktop for warming or heatingthe room. Prolonged use of the cooktop withoutadequate ventilation can be hazardous.• Do not store or use gasoline or other flammablevapors and liquids near this or any otherappliance. Explosions or fires could result.The electrical power to the cooktopmust be shut off while gas line connections arebeing made. Failure to do so could result in seriousinjury or death.