Electrolux 318 200 635 (0606) Rev. A Use & Care Manual

10 Setting Surface ControlsLOCATIONS OF THE SURFACE RADIANT ELEMENTSYour cooktop is equipped with radiant surface burners with different wattageratings. The ability to heat food quicker and in larger volumes increases as theelement wattage increases.The radiant surface elements are located on the 30” cooktop as follows:- 2 small radiant elements located at the right and left rear positions;- 1 dual radiant element located at the right front position;- 1 triple radiant element located at the left front position;The radiant surface elements are located on the 36” cooktop as follows:- 2 small radiant elements located at the right and left rear positions;- 1 dual radiant element located at the center front position;- 2 triple radiant elements located at the right and left front positions;On/Off On/Off POWEROn/OffOn/OffFig. 1 - 30” cooktopFig. 2 - 36” cooktopUSING THE TOUCH CONTROLThe recommended way to use the touch pads on the cooktop is shown inFig. 3. Be sure that your finger is placed in the center of the touch pad asshown. If the finger is not placed on the center of a pad, the cooktop maynot respond to the selection made.Lightly contact the pad with the flat part of your entire fingertip. Do not justuse the narrow end of your fingertip.Fig. 3