Dell Networking S4810 Specifications

Also see for Networking S4810: Configuration guide Configuration guide Installation guide Reference guide Reference guide

Contents

Ultra-low-latency, data center optimizedThe Dell Networking S-Series S4810 is an ultra-low-latency10/40GbE top-of-rack (ToR) switch purpose-built for applicationsin high-performance data center and computing environments.Leveraging a non-blocking, cut-through switching architecture,the S4810 delivers line-rate L2 and L3 forwarding capacitywith ultra low latency to maximize network performance. Thecompact S4810 design provides 48 dual-speed 1/10GbE (SFP+)ports as well as four 40GbE QSFP+ uplinks to conserve valuablerack space and simplify the migration to 40Gbps in the datacenter core. Priority-based flow control (PFC), data center bridgeexchange (DCBX) and enhance transmission selection (ETS),coupled with ultra low latency and line rate throughput, makethe S4810 ideally suited for iSCSI storage, FCoE transit and DCBenvironments. In addition, the S4810 incorporates multiplearchitectural features that optimize data center network flexibility,efficiency and availability, including I/O panel to PSU airflow orPSU to I/O panel airflow for hot/cold aisle environments, andredundant, hot-swappable power supplies and fans.The S4810 also supports Dell Networking’s Open AutomationFramework, which provides advanced network automation andvirtualization capabilities for virtual data center environments.An Active Fabric™ design with S4810 switches can be built outto create scalable, high-performance 10/40GbE data centernetworks. The resiliency of an Active Fabric is superior to legacy,centralized core architectures, since the failure of a single nodewithin a CLOS network cannot bring down the entire switchingfabric.The S4810 is supported with Active Fabric Manager (AFM), whichhelps automate design and deployment of multi-tier fabrics. AFMhelps customers manage multiple fabrics from a single console,enabling a unified view of the entire fabric, when combinedwith Dell OMNM and other management solutions. With AFM,over 25 templates can be customized for specific workloadand deployment scenarios, easily delivering active/active L2or L3 designs for 1/10/40G with Dell Z9000 to rack and bladeinfrastructures (including Dell MXL).Key applications• High-density 10GbE ToR server aggregation in high-performance data center environments• Design with the Z-Series fabric core switch to create aflat, two-tier, non-blocking 1/10/40GbE data centernetwork design• Design a Clos-based Active Fabric with Z9000 switch inleaf and spine with the S4810/S4820T 10GbE ToR switchesfor cost-effective aggregation of 10GbE uplinks• Enterprise iSCSI (iSCSI over DCB)Key features• 1RU high-density 10/40GbE ToR switch with 48 dual-speed1/10GbE (SFP+) ports and four 40GbE (QSFP+) uplinks(totaling 64 10GbE ports with breakout cables)• 1.28Tbps (full-duplex) non-blocking, cut-through switchingfabric delivers line-rate performance under full load with800ns latency• Scalable L2 and L3 Ethernet switching with QoS and a fullcomplement of standards-based IPv4 and IPv6 features• VLT and eVLT: multi-chassis link to enable up to 576 10GE(3:1 over subscription)• User port stacking support for up to six units• Open Automation Framework adds VM awareness as well asautomated configuration and provisioning capabilities tosimplify the management of virtual network environments• Modular Dell Networking OS software delivers inherentstability as well as advanced monitoring and serviceability functions• Redundant, hot-swappable power supplies and fans• Hardware support for DCB, FIPS operationDell Networking S4810High-performance 10/40GbE top-of-rack switchHigh-density, 1RU 48-port 10GbE switch with four 40GbE uplinks and ultra-low-latency, non-blocking performance to ensure line-rate performance; complete with feature-rich Dell NetworkingOS and storage optimization for iSCSI, FCoE transit and DCB.Ultra-low-latency10GbE top-of-rackswitch optimized fordata center efficiency.

/ 2

Related manuals for Dell Networking S4810