Dell Axim X50 User Manual

Also see for AXIM X50: Setup guide Owner's manual System information guide Setup guide Owner's manual

w w w . d e l l . c o m | s u p p o r t . d e l l . c o mUsing Cisco® LEAP Wireless LAN SecurityYour Dell Axim X50 supports 802.1X network authentication using CiscoLEAP. Cisco LEAP can be configured using the Odyssey Client application.NOTE: Before starting, ensure that your Wireless On/Off button is in theOn position.NOTE: LEAP is not supported on a peer-to-peer network.NOTE: LEAP is not supported on the low end version of Axim X50.To start the application do the following steps.1 Tap Start→ Settings→ Connections → Odyssey Client icon.2 Tap Settings→ Enable Odyssey to start using the client.To start using LEAP, perform the following steps.1 Obtain the following information from your network administrator:• Network name• Association mode• Encryption method2 From the Odyssey Client window, tap on Settings→ Configure→ Add.3 Enter the network name (SSID) if known, or tap on Scan to search theavailable Access Points. Tap Next.4 LEAP will only support an infrastructure network, so do not change thedefault settings in the drop-down menu. Tap Next.5 Fill in Association Mode and Encryption method. Tap Next.September 2004