DataCard Sp35 Installation Manual

Also see for Datacard SP35: Printer guide Printer guide Supplementary guide Quick install guide

Contents

DataCard Sp35 Installation Manual Manual pdf 1 page image

1SP Series Install e-GuideInstallation 1Before you install 3Installation audience 3Site requirements 3Site guidelines 3PC and software requirements 4ID system installation sequence 4Installation choices 5Unpacking and connecting the printer 7Unpacking the printer 7Powering on an SP35 or SP55 printer 7Powering on an SP75 printer 7Data cables 8Is the printer ready for driver installation? 9Installing the driver 11Install the Smart Driver™ to a USB port on Windows XP or 2000 11Install the Smart Driver™ to a USB port on Windows Me or 98 13Install the Smart Driver™ on Windows NT 14Printing sample cards 15Setting printer permissions 17Changing the type of printer connected 21Network installation 23About network printing 23Prepare the printer for installation 25Connect the printer to the network 26Printer and Smart Driver setup 30SNMP Support 30Updating the driver 33Updating the printer driver for Windows XP or 2000 33Updating the printer driver for Windows Me, 98 SE, or NT 3434Reinstalling the driver 35Removing the existing printer driver 35Running the Cleanup utility 36Installing the printer and driver again 36Troubleshooting Installation Problems 37Troubleshooting any installation 37Local (USB) installation troubleshooting 37Troubleshooting a network installation with a print server 38Troubleshooting an SP Series card printer with the Built-in Ethernet feature 39Removing a device from the Device Manager 40Connecting more than one printer or more than one PC 43Installing more than one printer using a USB connection 43Using more than one printer on a PC 44Printer pooling 45Use a printer pool 46Printer sharing 49PC port settings 55Set up a Universal Serial Bus (USB) port on all operating systems 55Serial port settings 56On the CD-ROM 61INSTALLATION GUIDE