Menu
Dan Dugan Sound Design Dugan-MY16 User Manual
                                            | |
Contents
| 
Dugan-MY16 User Guide26Naming Units and ChannelsConnected units are displayed in the top pane in alphabetical order. To display themin your own order, use names with number prefixes.To name a unit and its channels:1. Select a unit in the top pane.2. Select the yellow text in the right pane (under the Dugan logo) and type a name.3. Press the Enter key on the keyboard to set the name.4. To name a channel, select the yellow text and type a name.5. Press the Enter key on the keyboard to set the name.Channel naming is cleared by pressing reset (see page 36).When the unit is powered up, channel modes are determined by their preset modes;all other settings are retained.After configuring settings with the Dugan Control Panel, it can be disconnected. Allsettings are retained and the unit continues to function on its own.Channel PaneThe Channel Pane contains the controls and indicators for each channel. Channelsare always in one of three modes: man, auto, or mute. The active channel mode illu-minates. All transitions are made with a smooth, rapid fade. Select a channel modeby pressing the individual mode buttons or the Master PRESET button.Figure 3-3 shows a typical system: channels 1–4 in auto with ambient noise, and chan-nels 5–8 in mute. |
Related manuals for Dan Dugan Sound Design Dugan-MY16
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved