Menu
Dan Dugan Sound Design Dugan-MY16 User Manual
                                            | |
Contents
| 
Dugan-MY16 User Guide24Top PaneThe Top Pane displays all connected Dugan units. The active unit is enclosed by ayellow rectangle. Click on another unit to select it and deselect the previous unit.Figure 3-2 Top PaneSome Yamaha mixers have multiple card slots that can be used for additional Dugan-MY16s.All connected Dugan units appear in the Top Pane. If all connected units do not ap-pear in the Top Pane, see Establishing Network Connections on page 17.To display a unit’s IP address, hover the mouse over the unit’s name.To display a unit’s IP address, touch and hold the unit’s name.Add Units ManuallyTo add a unit manually with a known IP address, click the + sign at the right of theTop Pane and enter the IP address in the dialog that appears.To add a unit manually without a known IP address:1. Hold down the blue NETWORK RESET button on the rear panel for 3 seconds.2. Click the + sign at the right of the Top Pane.3. Enter the default IP address: 192.168.1.xxxx = last two digits of serial number, unless they are 00, in which case enter 100.4. Click OK to exit the dialog.To display a unit’s IP address, hover the mouse over the unit’s name.iPad |
Related manuals for Dan Dugan Sound Design Dugan-MY16
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved