Dacor Epicure ER36DSCH Installation Instructions Manual

Also see for Epicure ER36D: Instruction manual Instructions Use & care manual Planning guide Installation instructions

Contents

Dacor Epicure ER36DSCH Installation Instructions Manual Manual pdf 19 page image

Installing the Burner ComponentsInstallation InstructionsStack Burner InstallationBurner HeadCrown BurnerStack BurnerSpill TrayBurner RingRidge on bottomof burner capSTEP 1: Put burner ringon top of the head.STEP 2: Turn ring untilit drops into place. Twistback and forth to assureproper seating.STEP 3: Install burnercaps. Ridge on cap mustsurround top of ring.Burner HeadCrown Burner InstallationBurner BaseBurner RingRidge on bottomof burner capSTEP 1: Installburner head. Putlocating tab inkeyed hole.STEP 2: Installburner ring. Line upring tabs with headslots. Twist backand forth to assureproper seating.STEP 3: Install burnercap. Ridge on cap mustsurround top of ring.Keyed HoleWARNINGNever attempt to operate the cooktop section of the range withany of the burner rings, burner caps or grates removed.Remove the burner rings, burner caps and grates from theirshipping packages.Install the burners as shown. The location, type and size ofthe burners varies with the range model number.Gently set the grates on top of the spill tray. Put the legsof each grate inside the corresponding dimples. On modelER36D, the largest grate goes in the center.•••