PLANNINGGUIDEwww.Dacor.com Phone: (800) 793-0093Specifications subject to change without notice.Install all appliances according to accompanying installation instructions. 8.130”, 36”, 46”, 48” Wide,Slim Raised VentERV30, ERV36, ERV48,PRV30, PRV36, PRV4630 ¼"(768 mm)to37 ¼"(946 mm)10"(254 mm)30"(762 mm)18 5/8”(473 mm)5/16” (8 mm)thick stiffeneracross back3 3/4"(95 mm)1"(25 mm)28" 3 pronggroundedpower cordVent shownin raisedpositionProductdata labelMotorcoverFront of unit6"(152 mm)2 9/16"(65 mm)9/16"(14 mm)2 1/2"(64 mm)1 15/16"(49 mm)BAAdjustableanchor legs2 1/8"(54 mm)2 3/16"(56 mm)3/16"(5 mm)Top cap withvent downDImENSIoNS SIDE VIEW DImENSIoNS FRoNt VIEWAll tolerances: ±1/16” (±1.6 mm)unless otherwise statedwarningObserve all governing codes and ordinances•during planning and installation. Contact yourlocal building department for further information.This appliance must be installed in accordance•with the accompanying installation instructions.2 1/8" (54 mm)3/8"(10 mm)2 1/8" (54 mm)ERV top cap - side viewPRV top cap - side view7/16"(11 mm)Model no. a B Circuitrequirement*ERV/PRV30 30”(762 mm)27 3/8”(695 mm)Three prong electri-cal outlet connectedto 120 Vac, 60 Hz,15 Amp. grounded,dedicated, circuitERV/PRV36 36”(914 mm)33 3/8”848 mm)PRV46 46”(1168 mm)43 3/8”(1102 mm)ERV48 48”(1219 mm)43 3/8”(1102 mm)* Includes power supply requirements for external blowernOTES:The maximum installed height must not exceed the1.maximum specified countertop height of cookingappliances.install these raised vents only with approved Dacor2.appliances. See the planning guide for the particularappliance for proper applications and cutout information.This appliance must be install in conjunction with a3.single Dacor approved remote or in-line blower. Seefollowing pages for approved blowers.Document # PG08-001 Revised 03/29/10 Page 1/3