Dacor Epicure ER36D Planning Manual

Also see for Epicure ER36D: Instruction manual Instructions Installation instructions Use & care manual Planning guide

Dacor Epicure ER36D Planning Manual Manual pdf 1 page image

PLANNINGGUIDEwww.Dacor.com Phone: (800) 793-0093Specifications subject to change without notice.Install all appliances according to accompanying installation instructions. 5.10Epicure ®RangesER36D, ER48DGAS - ELECTRICAL ACCESS DIMENSIONSModel A B C D E*ER36D 5 5/8”(142.9 mm)18 3/8”(466.7 mm)10 3/4”(273.0 mm)13 11/16”(347.7 mm)7/8”(22.2 mm)ER48D 3 13/16”(96.8 mm)18 11/16”(474.7 mm)9 3/8”(238.1 mm)13 3/4”(349.3 mm)1 1/8”(28.6 mm)* The diameter on models equipped for use in Canada is ¼” (6.4mm) larger thanthose stated. Canadian units come from the factory pre-wired with an appliancecord. When installing an appliance cord on models that are not pre-wired, the holesize must be increased to 1 1/8” (1 3/8” for model ER48D) by removing the conduitbracket inside the range electrical access box.48” (1219 mm) Front of open doorFront of handleFront edge of bull noseFront panelRear of front panel/oven door30 3/4” (781 mm)(483 mm)(908 mm)(940 mm)(76 mm)24” (610 mm)(51 mm)(387 mm)(40 mm)(229 mm)(229 mm)29 3/8” (746 mm)28 1/4” (718 mm)26 1/8” (664 mm)******** Optional1 1/16” (27 mm) to cookingsurface (top of grates) fromtop of trimFinished sidepanelWidth: ER36D - 35 7/8” (911 mm)ER48D - 47 7/8” (1216 mm)BACDGas regulator access,cover removedRange electrical access,cover removedE Electrical connectionhole in bottomInletBack of rangeProduct tolerances: +/- 1/16” (+/- 1.6 mm) unless otherwise statedGAS SUPPLY PRESSURE REQUIREMENTS*Gas Type Manifold Pressure Minimum Gas SupplyPressureNatural Gas 5” Water Column 6” Water ColumnPropane (LP) 10” Water Column 11” Water Column* Maximum gas supply pressure 1/2 p.s.i. for all modelswARNINGObserve all governing codes and ordinances during planning•and installation. Contact your local building department forfurther information.This appliance must be installed in accordance with the•accompanying installation instructions.ELECTRIC CIRCUIT REQUIREMENTSRange Model Circuit Required Total Connected LoadER36D240 Vac, 4-wire* 60 Hz, 30Amp. (Min.) 40 Amp. (Recom-mended)6.5 kW (28 Amp.)ER48D 240 Vac, 4-wire* 60 Hz, 50Amp. 10.0 kW (42 Amp.)* 4-wire, two 120 Vac hot (L1 and L2), one neutral, one groundDocument # PG05 - 004 Revised 02/04/10 Page 1/2

/ 2

Related manuals for Dacor Epicure ER36D