Dacor Epicure ER30D Use And Care Manual

Also see for ER30D: Instruction manual Technical manual Installation instructions Installation instructions Use and care manual

Dacor Epicure ER30D Use And Care Manual Manual pdf 30 page image

28Replacing the Light BulbsLight bulb replacement is considered to be a homeownermaintenance operation. If the lights do not work, before replacingthem, please consult the Problem Solution Guide on page 30.To replace the light bulbs, follow these steps:Turn off power to the oven at the main power supply.Gently insert the pointed end of the supplied lens pry stickunder the center edge of the lens cover. Hold your handunder the lens for support and pry it loose. Pull the lens coverstraight out.Using a glove, insert the new bulb into the socket. Replace thelight bulbs only with Dacor Part No. 100429, available fromany authorized Dacor parts dealer.IMPORTANT: Do not touch the replacement halogen lightbulbs with your fingers. Halogen bulbs are sensitive to the oilsfrom your hand. The oils from your hand will stick to the bulband cause it to burn out faster than normal.When reinstalling the lens cover, line up the cut-out on theinside rim with the light socket. Gently press it into its originalposition.Turn the power to the oven back on at the main power supply.Reset the clock (see page 9).1.2.3.4.5.6.Cleaning and MaintenanceLight BulbSocketLens Cut OutLight fixturein oven wallLensWARNINGTo prevent electrical shock and/or personal injury, makecertain that the oven and light bulb(s) are cool and thatpower to the oven has been turned off at the main powersupply before replacing the light bulb(s).Always make sure the lens covers are in place when usingthe oven. The lens covers protect the bulbs from breakage.Use the pry stick with caution. Do not cause uneven stresson the lens cover.Replacing the lens cover without lining up the cut-out withthe light socket will damage the light fixture.••••Lens Pry Stick