Dacor ER30D Installation Instructions Manual

Also see for Epicure ER36D: Instruction manual Instructions Installation instructions Use & care manual Planning guide

Dacor ER30D Installation Instructions Manual Manual pdf 1 page image

Use these instructions to change the trim color on the ER30D, ER36D and ER48D series ranges.WARNING: To avoid burns, do not disassemble the range until it has cooled.WARNING: To avoid personal injury, wear safety glasses during installation.CAUTION: To prevent damage to the range, use only the tools indicated in these instructions.NOTE: It is not necessary to pull the range out from the wall to change the trim color.DANGER: Electric shock hazard! Before installation, disconnect powerat the circuit breaker or fuse box.Trim Replacement KitAERTK30, AERTK36, AERTK48INSTALLATIONINSTRUCTIONSRANGE MODELS: ER30D, ER36D AND ER48DPart No. 101516 Rev. EKit Part Number IdentificationTools RequiredPhillips Head Screwdriver (4-40)•Torx Driver (T20)•2 Clamps• Range Size Trim ColorCH = ChromeCP = CopperBR = BrassBC = Black ChromeAERTKXXYYParts included with this kitTrim Rings30-Inch Ranges (4)36 and 48-Inch Ranges (6)Door End Caps30 and 36-Inch Ranges (2)48-Inch Ranges (4)Range End Caps (2)Extra ScrewsPart #101505Part #83669Part #83571Screw Part # Use QuantityER30D ER36D ER48D101505 End Caps 2 2 283571 Trim Rings 12 18 1883669 Handle End Caps 2 2 4100385 Handle Mounting 2100026 Handle Mounting 2 4Part #100026Part #100385

/ 4

Related manuals for Dacor Epicure ER36D