D-Link DP-G321 User Manual

Also see for AirPlus DP-G321: Quick installation guide Brochure & specs

19Connection Mode: Select one of two connection modes: Infrastructure (default): Connect to an existing wireless AP orrouter in a WLAN. Ad-Hoc: Connect to wireless clients in the Peer-to-Peer mode.Using the Web Configuration (continued)Configuration > WirelessSSID: Assign the SSID in this box. You can manually input the name or select onefrom the pull-down menu. To search the available print server within the network,click the Site Survey button.Wireless Channel: Select the channel from the pull-down menu. The defaultsetting is 6.Transmission Rate: Select the data transmit rate from the pull-down menu. Thedefault setting is Fully Automatic.Wireless InterfaceWEP EncryptionThis field allows you to configure the settings of data encryption. Please rememberthat the WEP key must be set before the data encryption is enforced.WEP Encryption: This option allows you to select Disable, 64-bit, and 128-bit forencryption setting.WEP Key Format: You can decide the network key to be encoded by ASCII (ASCIIcharacters) or HEX (hexadecimal digitals). 64-bit WEP encryption uses a 10hexadecimal character key. The WEP encryption key must match the WEPsettings on your AP or wireless router to connect properly.Then, enter the key(s) for the network in the Key box (1-4).Advanced SettingBeacon Interval: Enter the number for the beacon interval in milliseconds.Preamble: This option allows you to set the length of the preamble. Setting optionsare: Long: set to 144 bits Short: set to 72 bits.Authentication Type: You can set the authentication type by selecting the settings:Open System, Shared Key, and Both.