D-Link DGS-6600-48T Cli Reference Manual

Also see for DGS-6600 Series: Quick installation guide Manual Hardware installation guide Quick installation guide

Contents

DGS-6604 m spanning-tree transmit hold-countCLI Reference Guide 856spanning-tree transmit hold-countThis setting is used to limit the maximum BPDU transmission rate for every port.spanning-tree transmit-hold-count VALUEDefault VALUE: 6Command Mode Global configurationUsage Guideline The transmission of BPDU on a port is controlled by a counter. The counter isincremented on every BPDU transmission, and decremented once each second.The transmissions are paused for one second, if the counter reaches thetransmit hold count.This parameter will be is used in common by STP, RSTP, andMSTP.Changing this parameter to a higher value may have a significant impact on CPUutilization, especially in MSTP mode. Lowering this parameter could slowconvergence in some scenarios. We recommend that to not change the valuefrom the default setting.Example This example shows how to configure the transmit-hold-count value.Verify the settings by entering the show spanning-tree command.Syntax DescriptionVALUE Specifies the value to restrict the numbers of BPDU transmitted on a port withinthe Hello Time period. The range is 1 to 10.Switch(config)# spanning-tree transmit-hold-count 5