| 
6 Command Line Interface D-Link Smart Managed Switch User Manual138show boot_fileshow fan regshow firmware informationshow flash informationshow ipif []show route { ipv4 | ipv6 }show switchupload {firmware_toTFTP {| } image_id <integer 1-2> | cfg_toTFTP {| } }DGS-1210-52MP>downloadPurpose To download and install a firmware, boot, or switch configurationfile from a TFTP server.Syntax download {firmware_fromTFTP {| } image_id | cfg_fromTFTP{| } }Description The download command downloads a firmware, boot, or switchconfiguration file from a TFTP server.Parameters firmware_fromTFTP − Download and install new firmware on theSwitch from a TFTP server.cfg_fromTFTP − Download a switch configuration file from aTFTP server. − The IPv4 address of the TFTP server. − The IPv6 address of the TFTP server. − The filename of the firmware or switchconfiguration file on the TFTP server. You need to specify theDOS path if the file is not at the root directory of the TFTP server.image_id - Specifies the image id to be configured.Restrictions None.Example usage:To download a firmware file: |
