D-Link DCS-60 User Manual

Also see for DCS-60: Technical specifications Quick installation guide

1Model No.: DCS-60 User’s ManualⅠ. IntroductionThe DCS-60 Camera Housing is constructed from die-cast aluminium and is powder coatedand stove finished.The design and manufacture is to the highest technical standard withenvironmental protection to level IP 67. The Housing is supplied complete with an adjustableFully-Cable-Managed Bracket (the concealed cable channel inside the mounting bracket).Ⅱ. Mounting configuration of DCS-60Fig.1Fig.2Inner space for camera mountW105 x H80 x L250mm1. Use the rear section of the Mounting Bracket (D) asa template for marking the position on the wall of theMounting Holes (H). Remove & drill to pattern required.2. Attach the Mounting Bracket arm to the wall using therawlplugs and screws provided.3. Feed cables from the main Housing (C) through thehole of the Mounting Plate (E) on the Mounting Bracket(D), and then feed the cable again to the concealedchannel inside the Mounting Bracket throughout thewall outlet (A) or bracket outlet (B).4. Attach the main Housing (C) to the Mounting Plate(E) of the Bracket with 4 of 1/4” x 14.7 mm Trilobularscrews (F) provided.5. Release Screw (G) on the Mounting Bracket to panand tilt the Housing . Position the Housing as requiredfor the correct Camera coverage, and then tighten bothscrews to secure.

/ 4

Related manuals for D-Link DCS-60