D-Link DCS-50 User Manual

Also see for DCS-50: Technical specifications User manual

1Model No.: DCS-50 User’s ManualⅠ. IntroductionThe DCS-50 Camera Housing is constructed from die-cast aluminium and is powder coatedand stove finished.The design and manufacture is to the highest technical standard withenvironmental protection to level IP 66. The Housing is supplied complete with an adjustableSemi-Cable-Managed Mounting Bracket.Ⅱ. Mounting configuration of DCS-50(D)(E)(F)(K)(G)Fig.1(B)90°90°7865(H)Fig.2Inner space for camera mountW90 x H70 x L230mm1. Use the rear section of the Mounting Bracket (D)as a template for marking the position on thewall of the Mounting Holes (H). Remove & drill topattern required.2. Attach the Mounting Bracket arm to the wallusing the rawlplugs and screws provided.3. Attach the main Housing enclosure (K) to theMounting Bracket with 2 of 1/4” x 14.7 mmTrilobular screws (F) provided.4. Release Screw (E) on the Mounting Bracket topan the Housing and release screw (G) to tilt theHousing. Position the Housing as required forthe correct Camera coverage then tighten bothScrews to secure.5. Feed cables through the Cover Plate (B) onthe Mounting Bracket from the wall, or by usingcable conduits as required.

/ 4

Related manuals for D-Link DCS-50