90D-Link DIR-890L User ManualSection 4 - Conffguration - Router ModeAccount Name: Enter your SMTP account name.Password: Enter your SMTP account's password.E-mail Log When Full or On ScheduleSend On Log Full: If enabled, this option will set the router to send the log when it is full.Send OnSchedule:If is enabled, this option will set the router to send according to a setschedule.Schedule: If you enable Send On Schedule, use the drop-down menu to selecta schedule to apply. The schedule may be set to Always Enable, oryou can create your own schedules in the Schedules section. Referto Schedule on page 88 for more information.Click Save when you are done.System Log (continued)COPYRIGHT © 2016 D-LinkE-mail Log When Full or On ScheduleSend When Log Full: EnabledSend on Schedule: EnabledSchedule: Always Enable ⌵DIR-890L HW:A1 FW:1.10System LogOn-board diagnostics run continually in the background to monitor the health of your router. The resultsare recorded in the system log if it is enabled. This info can be used to diagnose common problems or helpCustomer Support resolve issues more quickly.Settings FeaturesHome ManagementManagement >> System Log SaveSysLog SettingsE-mail SettingsEnable Logging to Syslog Server: EnabledSysLog Server IP Address: << Computer Name ⌵Enable E-mail Notification: EnabledFrom E-mail Address:To E-mail Address:SMTP Server Address:SMTP Server Port: 25Enabled Authentication: EnabledAccount Name:Password: