Craftsman Side Cabinet with SS Protect-it Owner's Manual

Owner's Manual[ CRRFTSMRN°[Side Cabinetwith SS Protect-it s14121Please indicate the following informationfrom the se_wice part drawing provided.Model NumberModel DescriptionCAUTION: Read and follow all SafetyRules and Operating Instructions beforefirst use of this product,Distributed by Sears BrandsManagement Corporation,Hoffman Estates, IL 60179F1714Call 1-800-366-7278 forService PartsRefer to Service Parts Drawingfor full listing of Service PartsSAFETY WARNINGS AND CAUTIONS:* DO NOT STAND in or on unit. Failure to adhere to this warning may cause unit to become unstableand tip, resulting in personal injury.* WEAR SAFETY GLASSES when removing and repositioning slides. Screwdriver could slip ormetal shavings could be produced, possibly causing personal injury.* USE CAUTION when opening multiple drawers, unit may become unstable and tip, causing productdamage or personal injury.* DO NOT MOUNT unit on truck bed or any other moving ob.iect. Failure to adhere to this warningmay void warranty and cause damage to unit or personal injury* DO NOT STEP in or on drawers. Unit may become unstable and tip resulting in damage to unit orpersonal injur3z* USE EXTREME CAUTION if moving unit with forklift. Unit could fall causing personal injury orproduct damage.* DO NOT ALTER unit in any manner, for example, do not weld external lock bars or dollies ontounit. Failure to adhere to this warning may cause damage to unit or personal injury.. MAXIMUM LOAD capacity for each &awer is 75 pounds.* A HEAVY DUTY slide cabinet must be used on an equally heavy duty cart.* Lock the drawers before moving this product. The &awers could come open and make the productunstable and tip, which may cause personal injury or product damage.SIDE CABINET INSTALLATION:*The side cabinet only mounts on theroll cabinet left side. Make sure handleand swivel casters are installed on rollcabinet right side before proceeding.*Use the locking feature of the swivelcasters to lock the roll cabinet in placeand prevent it from moving.*Close and lock all drawers on the rollcabinet and side cabinet.Step !*Install four bolts to outside handleholes on left side of roll cabinet.Step 2WARNING: Check that inside bolts onboth rigid casters are tight.• Remove outside bolts on liont caster.• Insert plate between the front rigidcaster and bolt head, then tighten bolts.• Repeat for other rigid caster.\Step 3• Lift and place side cabinet in place overthe four bolts. Be sure to place sidecabinet over all four bolts.Note: this may require two people. Theside cabinet is 100 lbs. empty.• Hold the side cabinet securely againstthe roll cabinet.• Fasten each hold down plate to theside cabinet with two bolts and tightensecurely.

/ 4

Related manuals for Craftsman 14121