Craftsman F1198A5 Owner's Manual

Owner's Manual PART# FII98A5(RRFTSMRN °BALL BEARING SERIESPlease indicate the following information from the service part drawing provided.Model Number:Model Description:*Product you purchased may vary from picture shown.Caution: Read and follow all Safety Rules and Operating Instructions before firstuse of this product. Retain this document for future reference.Sears, Roebuck and Co., Hoffman Estates, IL 60179, USA F1198A5SAFETY WARNINGS AND CAUTIONS:• DO NOT stand on this product. You may fall which may cause personal injury.• WEAR SAFETY GLASSES when removing or repositioning the slides. The tool could slipwhich may cause personal injury.• When moving this product, do not pull it. Push the product to prevent personal injury.• Handle and swivel casters must be attached on the same side of the product.• USE THE BRAKES when not moving this product. This will prevent the product fromrolling, which may cause personal injury or product damage.• BE CAREFUL when opening more than one drawer. The product may become unstableand tip, which may cause personal injury or product damage.• DO NOT mount this product on a truck bed or any other moving object. This may causepersonal injury or product damage.• DO NOT step in the drawers. You may fall which may cause personal injury.• Appropriately secure this product before moving it with a forklift.• DO NOT tow with power equipment. The product could tip, which may cause personalinjury or product damage.• DO NOT alter this product in any manner. For example, do not weld external Iockbars orattach electrical equipment. This may cause product damage or personal injury.• A heavy duty side cabinet must be used on an equally heavy duty cart.• Keep the product on level surfaces. The product may become unstable and tip if stored ormoved on an un-level surface, which may cause personal injury or product damage.• When the cover is opened, be sure the cover stop is in the locked position. This willprevent accidental closure and personal injury.• BE CAREFUL when closing the cover. Remove hands before the cover closescompletely to prevent personal injury.• The maximum weight for each drawer should be no more than 50 pounds.• The maximum product weight, including contents, should be no more than 1,000 poundsfor RolI-Aways.• Close the cover and lock the drawers and doors before moving this product. The drawersor doors could come open and make the product unstable and tip, which may causepersonal injury or product damage.• The work surface must be removed if a chest is placed on top of a cabinet. Stackedproducts should be bolted together. The products could become unstable and tip, whichmay cause personal injury or product damage.• When locking a chest, close the drawers before closing the cover for lock bars to workproperly.• Spread the weight out evenly in the tote trays. If the weight is not spread evenly, thecontents could shift and fall out, which may cause personal injury and damage to thecontents or tote tray.Call 1-800-4MY-HOME (1-800-469-4663) for Service Parts.Refer to Service Parts Drawing for full listing of Service Parts.TOOLS REQUIRED: HARDWARE INCLUDED:3/8" wrench#14-10 X 5/8

/ 4

Related manuals for Craftsman F1198A5