Craftsman SP5373 Owner's Manual

CHiP BAG ASSEMBLY -LOWER FiLTRATiON HOUSING1. Insert lower Chip Bag by tilting the Metal ReinforcedBandat an angle and position it through the hole inthelower Filtration Housing.2. Tuck one side of the Band under the SawdustChute Extension.3. Allow the opposite side to rest on the ridge of theopening.4. Tug on the Chip Bag to insure proper seating,F_LTRATION HOUSING SAWDUST CHUTEEXTENSIONUPPER FILTER/DUST BAG ASSEMBLY1. Disconnect the Adjustable Band Clampand inserttheend through the loops provided at the opening of theFilter/Dust Bag.2, Invert the Filter/Dust Bag and slip the open end of theBag over the 1" Relief on the top opening of theFiltration Housing.3, Secure the Bag by adjusting the rectangular barto thefourth set of hooks.4. Pull the lever tight until it seats itself._ CAUTION: Make sure the opening of the bag istight against the relief so dust will not escape.FILTER/DUST BAGHOLDERHANDLE---_RELIEF /FILTER/DUST BAGADJUSTABLEBAND CLAMPtl