Craftsman Rapid Ready 21AB45M5099 General Setup

Also see for 247.299320: GENERAL SETUP GENERAL SETUP GENERAL SETUP

General SetupRead operator’s manual and follow all SafetyRules and instructions before operating thisequipment.778-122372Insert handle into thehandle mounting bracket.Install the hardware asshown.AttachingHandle AssemblyNOTE: Images shown are for references only. Your individual tiller may have different features than those shown. Please refer to operator’s manual.OilGasYou must ADD OIL beforeoperating tiller.Slowly pour entire bottle ofoil provided into the oil fillspout. Replace and tightendipstick.Fill fuel tank to bottom oftank filler neck.Use fresh, regular unleadedgasoline with a minimum of87 octane. Do not add E85gasoline.67AttachingClutch CableRoute the clutch cablethrough the hole in theupper handle and attach tothe clutch bail.4CartonRemovalShift the tiller into theNeutral (N) position anduse the handle to liftand pull the tiller off theshipping platform.Attachingthe Depth Stake1Install the handle on thedepth stake. Install the depthstake to the tine shield withthe hardware.3Install the control rodinto the indicator bracket(A) and the gear selectorhandle (B) with thehardware as shown.AttachingControl RodBA5ClutchBailGasolineFiller CapControl RodEngineOil Cap

/ 2

Related manuals for Craftsman 247.299320