Craftsman 486.240320 Owner's Manual

BAG MOUNT\ 318'" x 314"HEX BOLTx 1-1t4"HEXBOLTBRACERODENDFIGURE 6,, Assemble the height adjustment strap (hole end)to the sweeper housing. See figure 7 Place5/16" x 3/4" carriage bolt through the squarehole in right hand side of sweeper housing. Nextpeace spacer into large hole on strap and overend of carriage bolt, Secure with 5/16" flatwasher, 5/t6" !ock washer and 5/16" hex nutSee figure 7HEIGHT ADJUSTMENT STRAP_RIP5116" x 3t4" CARRIAGE BOLTSPACER HAND KNOB5/16" FLAT WASHER 5116" FLAT WASHER5/16" LOCI( WASHER 5/16" x 3/4" CARRIAGE5f16" HEX NUT BOLT,,,Assemble other end of height adjustment strapto height adjustment handle See figure 7. Placeslot on strap in line with square hole in heightad}ustment handle Secure strap with 5/16" x3/4" carriage bolt, 5/16" flat washer and handknob See figure 7. NOTE: Lightly coat slot withgrease for ease of adjustment.Assemble the grip, with finger knobs as shown,to the height adjustment handle, See figure 7,Assemble the hitch pin, two 1" Diao x 3/4" longspacers and hairpin cotter to the hitch bracketand hitch bar. See figure 8 See page 10 foradjustment before connecting lawnsweeper toyour Sears riding mower or tractor.HITCH PIN1" DIA.LoNGX3/4 ''_ ///HITCH BRACKET' ) ,gARHAIRPIN_COTTEI. _-"_."_-...FIGURE 8FIGURE 7