Craftsman 315.SS630 Operator's Manual

Also see for 315.SS630: Operator's manual

Contents

_ WARNING:SAVETHESEINSTRUCTmONS.Toreducethe risksoffireor expbsion,eUectricshock,andtheinjuryto persons,readandunderstandaHinstructionsincludedinthis manualBefamiUiarwiththe controUsandtheproperusageofthe equipment.READ ALL mNSTRUCTmONSKNOW YOUR POWER TOOL. Read the operator'smanuaU carefully. Learn the machine's appUications andUimitations as well as the specific potentiaUhazards reUatedto this tooLWAF{NING: To reduce the risk of fire or expbsion:Do not spray fiammabUe or combustibUe matedaUsnear an open flame or sources of ignition such ascigarettes, motors, and electrical equipment.For units intended for use with only water-based ormineral spirit-type materials with a minimum flashpoint of 140°F (60°C), do not spray or clean withliquids having a flash point less than 140°F (60°C).Paint or solvent flowing through the equipment isable to result in static electricity. Static electricitycreates a risk of fire or explosion in the presence ofpaint or solvent fumes.Do not use a paint or a solvent containing haloge-nated hydrocarbons.Keep spray area well ventilated. Keep a good supplyof fresh air moving through the area. Keep pumpassembly in a welPventilated area.Do not smoke in the spray area.Do not operate light switches, engines, or similarspark-producing products in the spray area.Keep area clean and free of paint or solvent contain-ers, rags, and other flammable materials.Know the contents of the paints and solvents beingsprayed. Read all Material Safety Data Sheets(MSDS) and container labels provided with thepaints and solvents. Follow the paint and solventmanufacturer's safety instructions.Fire extinguisher equipment shall be present andworking.WARNING: To reduce the risk of skin injection:Do not aim the nozzle at, or spray any person oranimal.Keep hands and other body parts away from thedischarge. For example, do not try to stop leakswith any part of the body.Always use the spray tip. Do not spray without spraytip in place.Only use a spray tip specified by the manufacturer.Use caution when cleaning and changing spray tips.in the case where the spray tip clogs while spraying,follow the manufacturer's instructions for turning offthe unit before removing the spray tip to clean.Do not leave the unit energized while unattended.When the unit is not in use, turn off the unit inaccordance with the manufacturer's instructions.High pressure spray is able to inject toxins into thebody and cause serious bodily injury. In the eventthat injection occurs, seek medical attention imme-diately.Check parts for signs of damage. Replace any dam-aged parts.This system is capable of producing 2500 psi. Onlyuse replacement parts or accessories that are speci-fied by the manufacturer and that are rated a mini-mum of 2500 psi.Know how to stop the unit quickly. Be thoroughlyfamiliar with the controls.Verify that all connections are secure before operat-ing this unit.For household use only.WARNING: To reduce the risk of injury:Do not operate or spray near children. Keep childrenaway from equipment at all times.Do not overreach or stand on an unstable support.Keep effective footing and balance at all times.Stay alert and watch what you are doing.Do not operate the unit when fatigued or under theinfluence of drugs or alcohol.3 - English