Craftsman 315.111640 Owner's Manual

Also see for 315.111640: Owner's manual

SWITCHSee Figure 2.To turn your screwdriver ON, depress switch trigger inthe direction of the arrow in figure 2. To turn it OFF,release the switch trigger.TRIGGER Fig, 2TWO SPEED SWITCHSee Figure 3.Your screwdriver has been designed for two speeddriving. A slide switch is located on top of yourscrewdriver to select either HI or LO speed. Whenusing screwdriver in the HI speed setting, speed willincrease and unit will have less power and torque.When using screwdriver in the LO speed setting,speed will decrease and unitwill have more powerand torque. Use HI speed for fast screwdrivingapplications and LO speed for high power and torqueapplications.TWO SPEED (HI-LO SWITCH)HIGHLOWFig. 3SWITCH LOCKSee Figure 4.The switch triggercan be locked in the OFF position.This feature can be used to prevent the possibilityofaccidental startingwhen not in use. To lock switchtrigger, place the forward/reverse switch in centerposition.FORWARD (F)REVERSE (R)SWITCHREVERSE (R)FORWARDWARNING: Battery toots are atways inoperating condition.Therefore, switch shouldalways be lockedwhen not in use or carrying atyour side.REVERSIBLESee Figure 4.Your screwdriver is equipped with a Forward/ReverseSwitch which allows you to change the direction ofrotation of the bit. For driving or forward rotation, slide(F) position,To reverse thebit direction, slide the switch to the reverse (R)position.CAUTION: To prevent gear damage, alwaysallow bit to come to a complete stop beforechanging the direction of bit rotation.To stop your screwdriver, release switch trigger andarrowyour screwdriver to come to a complete stop._1= WARNING: Always wear safety gegg_es orsafety glasses with side shields when operatingtools. Failure to do so could result in objectsbeing thrown intoyour eyes, resultingin possibleserious injury.8