Craftsman 24531 - Tow-Behind Sprayer Owner's Manual

CARTON CONTENTS1. Lid2. Tank3. Wheels (2)4. Axle5. Hitch Tube, L.H.6. Hitch Tube, R.H.7. Hitch Brackets (2)8. Boom Mount Bracket9. Spray Gun Assembly10. Boom AssemblyREMOVAL OF PARTS FROM CARTON• Remove all parts and hardware packages from thecarton. Lay out all parts and hardware and identifyusing the illustrations on pages 3 and 4.TOOLS REQUIRED FOR ASSEMBLY(2) 1/2" Wrenches(1) Screwdriver(1) Pliers(1) Hammer• Assemble the hitch tubes to the tank using four 5/16"x 1-1/2" hex bolts, 5/16" lock washers and bowedwashers. Place the bowed washers between the tankand the hitch tubes. Do not Ughten yet. See figure 2.• Fasten the hitch tubes together at the front using two5/16" x 3" hex bolts, four 5/16" lock washers and two5/16" hex lock nuts. Do not tighten yet. See figure 2.• Assemble the axle clamps to the hitch tubes usingfour curved head bolts, 5/16" lock washers and 5/16"hex nuts. Do not tighten yet. See figure 1.5/16" x 1-5/6"CURVED HEAD BOLTHITCH TUBE (LH)r16" LOCK \AXLE WASHERCLAMP HITCH TUBE (RH)5/16" HEX NUTFIGURE 116" HEXLOCK NUTFIGURE 2