Craftsman 19B30005791 Installation Manual

Blade InstallationWARNINGBefore beginning installation, place the tractor on a firm and level surface, set theparking brake, place the PTO in the disengaged (OFF) position, stop the tractor’smotor and remove the ignition key to prevent unintended starting.WARNINGCutting blades are sharp. Always protect hands by wearing heavy leather workgloves to grasp blades.Remove the cutting deck from beneath the tractor as instructed in your tractor’sOperator’s Manual.1. Gently flip the deck over to expose its underside.2. Stablize one of the cutting blades with a blade lock tool or a block of wood.See Figure 2.Figure 2Model 19B30005791 mulch kit is designed for use with select 46-inch two-bladecutting decks. Refer to your tractor’s Operator’s Manual to assure compatibility.Carton ContentsBefore beginning installation, remove all parts from the carton to make sureeverything is present. Carton contents are listed below and shown in Figure 1. Partnumbers are shown in parentheses.• Two Mulching Blades (742-04268)• One Deck Mulch Plug Assembly (631-05195A)• One Wing Knob (720-04122)Figure 1Form No. 769-18450(November 8, 2018)MULCH KIT 46” DECKModel No. 19B30005791INSTALLATION MANUAL