Craftsman 19A30041791 Installation Manual

Blade InstallationWARNINGBefore beginning installation, place the tractor on a firm and level surface, set theparking brake, place the PTO in the disengaged (OFF) position, stop the tractor’smotor and remove the ignition key to prevent unintended starting.WARNINGCutting blades are sharp. Always protect hands by wearing heavy leather workgloves to grasp blades.1. Gently flip the deck over to expose its underside.2. Stablize one of the cutting blades with a blade lock tool or a block of wood.See Figure 2.Figure 2Model 19A30041791 mulch kit is designed for use with select 50-inch triple-bladestamped cutting decks. Refer to your tractor’s Operator’s Manual to assurecompatibility.Carton ContentsBefore beginning installation, remove all parts from the carton to make sureeverything is present. Carton contents are listed below and shown in Figure 1. Partnumbers are shown in parentheses.• Three Mulching Blades (942-05052-X)• One 50” Deck Mulch Plug Assembly (631-05178)• One Wing Knob (720-04122)• One Chute Adapter (731-10133)Figure 1Form No. 769-18990(November 11, 2018)EXTREME MULCH KIT 50” DECKModel No. 19A30041791INSTALLATION MANUAL