Craftsman 172.417730 Owner's Manual

1091. Remove the grinder from the carton and inspect it carefully to make surethat no breakage or damage has occurred during shipping.2. Do not discard any of the packing materials until all parts are accounted for.3. One grinding disc is included.4. If any of the parts are damaged or missing (refer to PARTS LIST below), return thegrinder for replacement to the retailer from which it was purchased.WARNING: Your tool should NEVER be connected to the power sourcewhen you are assembling parts, making adjustments, installing or removinggrinder discs, cleaning or when it is not in use. Disconnecting the tool willprevent accidental starting, which could cause serious personal injury.!UNPACKING / DESCRIPTIONPARTS LIST (Fig. 1)TECHNICAL DATARated Voltage 120 V ~ 60 HzRated Power Input 6.5ANo Load Speed 11000/minDiameter Of Grinding Discs 115mmDisc Size 4 -1/2’’Disc Bore 7/8’’Spindle Thread 5/8’’- 11Machinery Weight 4.4 lb / 2.0 kgProtection Degree / IICord Length 10 ft.1. On-Off Switch2. Auxiliary Handle3. Spindle Lock Button4. Decoration Ring5. Outer Flange6. Inner Flange7. Spindle8. Grinding Disc9. Spanner10. Grinding Disc Guard11. Clamping Screw12. Coded Projection1.2. 3.4.7.5. 8.6.10.11.12.INCLUDED ACCESSORIESNOTE: Always refer back to these PARTS LIST numbers for product call-outsand operation reference.- Spanner- Auxiliary Handle- Grinding Disc Guard- Grinding Disc9.

/ 9

Related manuals for Craftsman 172.417730