Craftsman 130.16491 Operator's Manual

Page 5SAVE THESE INSTRUCTIONSSome of the following symbols may be used on this tool. Please study themand learn their meaning. Proper interpretation of these symbols will allow you tooperate the tool better and more safely.V Volts VoltageA Amperes CurrentHz Hertz Frequency (cycles per second)W Watt Powermin Minutes TimeAlternating Current Type of currentDirect Current Type or a characteristic of currentNo Load Speed Rotational speed, at no loadClass II Construction Double-insulated construction.../min Per Minute Revolutions, strokes, surface speed,orbits, etc., per minuteWet Conditions Alert Do not expose to rain or use in damplocations.Read The Operator’s ManualTo reduce the risk of injury, user mustread and understand operator’s manualbefore using this product.Eye ProtectionAlways wear safety goggles or safetyglasses with side shields and a full faceshield when operating this product.Safety Alert Precautions that involve your safety.No-Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.No-Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.No-Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.No-Hands Symbol Failure to keep your hands away from theblade will result in serious personal injury.Hot Surface To reduce the risk of injury or damage,avoid contact with any hot surface.SYMBOL NAME DESIGNATION/EXPLANATION16491 Manual_Revised_18-0828