Cisco TelePresence SX20 Quick Set Installation Sheet

Also see for TelePresence SX20: Getting started guide User guide User guide User guide Getting started guide

78-20385-01 SX20 Quick Set Installation Sheet | 2011 DECEMBER | © 2011 Cisco Systems, Inc. All rights reserved.Installing Cisco TelePresence SX20 Quick SetA 级声明 (A Class product declaration)本产品为 A 级 ITE，在其使用说明，铭牌等显著位置中已包含如下内容的声明(We declare here that the subject product is A class ITE product, and thefollowing statement is clearly marked in the user manual or nameplate):声明所在位置 (Position of the Declaration):  使用说明 User Manual警告此为 A 级产品。在生活环境中，该产品可能会造成无线电干扰。在这种情况下，可能需要用户对干扰采取切实可行的措施。WARNING:This is a class A product. In a domestic environment thisproduct may cause radio interference in which case the user may berequired to take adequate measures.SX20 Quick Set componentsy SX20 Codecy Camera optionsA: PrecisionHD 1080p 12XB: PrecisionHD 1080p 4XS2y Table Mic 20 microphone(1 default and 1 optional)y Remote control andfour AAA batteriesy HDMI cable for monitor(1 default and 1 optional)y Ethernet cable for LANy VGA to DVI-A cablefor PC connectivityy Camera cabley Power supply andpower cabley Camera mounting bracketIn addition to the SX20 Quick Set you must provide a monitor orprojector, and a loudspeaker (external or built-in to the monitor) tocomplete your video conferencing system.User guidesUser guides and compliance and safety information for this product,is available at http://www.cisco.com/go/telepresence/docs.Navigate to your product in the right pane; start by selectingTelePresence Solutions Platform.EMC Class A declarationWARNING: This is a class A product. In a domestic environment this productmay cause radio interference in which case the user may be required to takeadequate measures.Camera option A:PrecisionHD 1080p 12XSnap on the lens hood toprevent stray light fromdisturbing your videoexperience.The camera snaps to themagnets on the bracket.Camera option B:PrecisionHD 1080p 4XS2The camera isfastened to the bracketwith a screw.Tool: 4 mm Allen Key(not provided).Recommended room setupThe following should be regarded asguidelines only. Try things out on-sitebefore fixing any mounting positions.To learn more about optimizing youroffice or meeting room for videoconferencing, please read the Videoconferencing room primer andGuidelines for video conferencingroom acoustics documents availableon our web site.Place the microphone(s) asclose to all meeting participantsas possible.Place the camera just abovethe monitor to enhance theperceived eye contact.If using the camera mountingbracket, fasten it to the monitorwith the Velcro.When placing the monitor andcamera, use the camera selfview function to make sure allparticipants are captured by thecamera.Aim for good illumination of aperson’s face to avoid shadows.Also avoid direct light on themonitor to prevent reflections.The lower edge of the monitorshould be vertically aligned withthe table top.Monitors larger than 55” shouldbe placed slightly lower.

/ 2

Related manuals for Cisco TelePresence SX20