Cisco TelePresence PrecisionHD Installation Sheet

Page 178-19791-01 PrecisionHD Camera - 1080p12x Installation Sheet | December 2010 | © 2010 Cisco Systems, Inc. All rights reserved.Installing Cisco TelePresence PrecisionHD Camera - 1080p12xLine inLine inLine inThis box contains:• PrecisionHD 1080p 12X camera• Lens hood• Power supply 12 Vdc• Mains power cable• HDMI cable (5 m / 16 ft)• HDMI to DVI-D adapter• VISCA camera control cable(5 m / 16 ft), RJ45 to DB9• Daisy chaining cable, RJ11 to RJ45User documentationThe user documentation for this product isfound on the Cisco web site. Go to:http://www.cisco.com/go/telepresence/docs.1 We recommend that you mount thelens hood to prevent stray light fromdisturbing your video experience.2 Turn the camera upside down tocheck the video output formatsetting. Alter the setting if needed.3 Connect the camera to your codec. If you connect to a C-series codec, the power will be suppliedfrom the codec and the camera power supply will not be needed.Camera shownwith lens hood mounted.Lens hoodDIP switch table for video formats1 2 3 4 5 HDMI HD-SDI0 0 0 0 0 Auto0 0 0 0 1 1080p25 1080p250 0 0 1 0 1080p30 1080p300 0 0 1 1 1080p50 720p500 0 1 0 0 1080p60 720p600 0 1 0 1 720p25 720p250 0 1 1 0 720p30 720p300 0 1 1 1 720p50 720p500 1 0 0 0 720p60 720p600 1 0 0 1 Software controlThe table shows the different settings available forthe HDMI and the HD-SDI outputs.Auto: Camera negotiates format over HDMI.HD-SDI tracks HDMI and defaults to 1080p30 inabsence of HDMI sync.Software: For more information about theSoftware control setting, consult the VISCA™commands in the PrecisionHD camera user guide.Power supply connectionis NOT needed when thecamera is used with aC-series codec. Camera control. RJ45 to RS 232.VISCA™ protocol is supported.Connect HDMI HD video out on camera to HDMI Main camera in on codec.If you need to connect the camera to a PrecisionHD Video Switch or to a system with aDVI-D socket, use the enclosed HDMI to DVI-D adapter.HD-SDI socketThe rear panel socketsPower supplyExtra Camera out and for Daisy chainingCamera control HDMI Video out Not usedHD-SDI outDIP switch10HDMI and HD-SDIcan be used simultaneously.HDMI and HD-SDI can beused simultaneously.VISCA™ commandsThe VISCA™ commands for controlling thecamera are described in the PrecisionHDcamera user guide.VISCA™ is a trademark of Sony Corporation.

/ 2

Related manuals for Cisco TelePresence PrecisionHD