Cisco Linksys WVC54G Quick Intallation

Also see for Linksys WVC54G: User guide

A Division of Cisco Systems, Inc.®Model No.Quick InstallationModel No.WirelessWVC54G (UK)Internet Video CameraWireless-G1 2A Attach the antenna.B Connect the included Ethernetnetwork cable to your router,switch, or computer.C Connect the other end of thecable to the Ethernet port onthe Camera.D Connect the included poweradapter to the Power port onthe Camera.E Plug the power adapter intoan electrical outlet.The Ready LED flashes whilethe Camera is initializing. Whenthe Camera is ready for setup,the Ready and Ethernet LEDsare solidly lit.F Enter a unique name for theCamera in the Camera Namefield, and complete theDescription field. Select yourtime zone, and enter the dateand time. Then click Next.G If your network has a router orother DHCP server, selectAutomatic Configuration-DHCP. If the Camera requires astatic IP address, keep thedefault setting, Static IPaddress.Click Next.H If you selected AutomaticConfiguration-DHCP in step G,then proceed to step I.If you selected Static IPaddress, the IP Settings screenwill appear. Enter an IPAddress, Subnet Mask, andDefault Gateway appropriatefor your network. You mustspecify an IP Address andSubnet Mask. If you are unsureabout the Default Gateway,then leave this field blank.Complete the Primary DNSand/or Secondary DNS fields.Enter at least one DNS address,which you can obtain fromyour ISP. Click Next.AHC GA Insert the Setup CD-ROM intoyour CD-ROM drive. The SetupWizard should runautomatically, and theWelcome screen shouldappear. If it does not, clickStart and then Run. In the fieldprovided, enter D:\wvc54g.exe(if “D” is the letter of your CD-ROM drive).B Click Setup to begin the setupprocess.C Make sure the Camera isproperly connected to yournetwork. Click Next.D The screen will display a list ofWireless-G Internet VideoCameras on your network andstatus information. In theSelection box, click the nameof the Camera you arecurrently installing. Click Next.E A verify password screen willappear. In lowercase letters,enter admin in theAdministrator Name andPassword fields. Click OK.NOTE: The default IP address of theCamera is 192.168.1.115.NOTE: If you want to connect theCamera to a wireless network forsetup, refer to the User Guide on theSetup CD-ROM for instructions.IMPORTANT: You MUST connect theCamera to a router, switch, or PC usingan Ethernet network cable BEFOREpowering on the Camera. Otherwise, theCamera will not function.DCDEConnect the Camera to a WiredNetwork for Setup Set up the Video CameraPackage Contents• Wireless-G Internet Video Camera• Camera Desktop Stand• Detachable Antenna• Power Adapter• Ethernet Network Cable• Setup CD-ROM with User Guide(English only)• User Guide (English only) on CD• Quick Installation Guides• SoloLink DDNS Free Trial CardFGHz2 802.11g4,

/ 2

Related manuals for Cisco Linksys WVC54G