Cisco TelePresence Manual

Also see for TelePresence: Quick reference guide Administration guide Brochure Specifications Administrator's guide

C H A P T E R3-15Cisco TelePresence Content Server Release 6.2.1 Administration and User Guide3Configuring a Cisco Unified CommunicationsManager SIP Trunk with a CiscoTelePresence Content ServerThis document includes instructions for configuring a Cisco Unified Communications Manager version9.1.2 and 10.5 Session Initiation Protocol (SIP) trunk with Cisco TelePresence Content Server (ContentServer) Release 6.2.Before integrating Cisco Content Server 6.2 with CUCM through a SIP trunk, confirm that the CiscoContent Server is ready for the integration completing the applicable tasks in the Content Serverinstallation guide. See thehttp://www.cisco.com/c/en/us/td/docs/telepresence/tcs/6_0/installation/guide/tcs-vm-install.htmlCUCM Integration with Content Server 6.2After installing the CUCM software is installed, complete these procedures in the following order:• CUCM Integration with Cisco Content Server Standalone• Cisco TCS 6.2 with a Content Server cluster configuredCisco Content Server StandaloneTo create a SIP Trunk between CUCM and Content Server.1. Create the SIP Trunk Security Profile2. To Create the SIP Profile3. Create the SIP TrunkComplete these steps in the order given:Create the SIP Trunk Security ProfileStep 1 Login to the Cisco Unified Communication Manager Administration Interface.Step 2 Choose Security > SIP Trunk Security Profile.Step 3 On the Find and List SIP Trunk Security Profiles page, click Add New.