Cisco SX10 User Manual

Also see for TelePresence SX10: Getting started guide User guide User guide User guide User guide

August 2019Cisco SX10, SX20UserGuideTo turn on the system, press the ‘Power’ button on the remote control.Ensure Cisco system white light is on.To wake up the Telehealth system, press any button on the remote.If the systems does not turn on/wake, ensure the TV is on theappropriate input.If you see the system name appear at the top of the screen the system isonline.If you see ‘No Network Connection’ at the top of the screen the systemis offline. Please contact your regional technical support to resolve anyconnectivity issues.Turning On/Waking up the Telehealth System1. Decrease/Increase volume.2. Parameter keys which move the cursorleft/right/up/down.3. OK/Enter.4. Go back one step.5. Microphone mute/unmute.6. Go back/Call button/Accept incoming call.7. Reject incoming call/End call/Cancel/Go backto Home screen.8. Keypad: used to dial.1. The ‘Settings’ icon provides access to Standby mode,System Information and the Do Not Disturb feature. Whenset to ‘Do Not Disturb,' ringtones and call attempts madeby others to reach you will appear as missed calls. Youmay, however, place a call. While in ‘Do Not Disturb,’ thesystem will return to normal operation after 60 minutes.2. The ‘Call’ icon is located to the left in the lower part ofthe display.3. The ‘Share Content’ icon is located to the right in thelower part of the display.4. The ‘Camera Control’ menu is located in the upper rightcorner of the display.If someone calls you, you may accept or decline the call. If youdecline the call, a message stating that the unit is busy will besent to the caller. You may also use the call keys locatedbelow the circular buttons on the remote control toaccept/decline a call (green=accept, red=decline).The RemoteThe Home ScreenReceiving a Call

/ 5

Related manuals for Cisco TelePresence SX10