Cisco SX10 User Manual

Also see for TelePresence SX10: Getting started guide User guide User guide User guide User guide

Contents

content sharing

Place CallTo enter numbers justpress the correspondingkeys on the remote.To invoke the virtualkeyboard, use the leftarrow Cursor key to move to the 123 field. You may nowmove about the keyboard and select characters. Press OKto select a character.Select the green Call field on the scren or press the greenCall button on the remote to place the callUse the Cursor keys ofthe remote control toselect the Search or Dialfield, as outlined.Make sure Call is selectedand press OK or the greenCall button on the remotecontrol.Place Call from Contact List Change the Screen LayoutReceive or Decline CallsOnce an entry has beenlocated, press OK on theremote control to invokethe Call menu. Then pressthe green Call button orthe OK button on the remote control to place the call.Use the Cursor keys onthe remote control togo between Favorites,Recents and Directoryand then down in one ofthe lists.Make sure Call is selectedand press OK or the greenCall button on the remotecontrol.Use the Arrow keys onthe remote control tomove horizontally to thenew layout you would liketo use and press OK.Navigate to Layout ( ) inthe upper right corner andpress OK on the remotecontrol. This icon willappear only when relevant.Quick Reference GuideCisco TelePresence SX10, SX20CE8.0If someone calls you,you may accept, declineor ignore the call.If you decline the call,busy information will besent to the calling party.You may also use thekeys on the remotecontrol directly.

/ 2

Related manuals for Cisco TelePresence SX10