Cisco Rack-Mount and Cable Mgmt. Cisco 7505/7010 Installation Instructions Manual

Also see for 7505: Replacement instructions Quick start guide Configuration guide Replacement instructions

Contents

1Doc. No.Copyright © 1995Cisco Systems, Inc.All rights reserved.Cisco 7010 and Cisco 7505Rack-Mount and Cable Management KitsInstallation Instructions78-1231-02Cisco 7010 Product Numbers: ACC-7010RMK= and ACC-7010CBLM=Cisco 7505 Product Numbers: ACS/5-RMK= and ACS/5-CBLM=Customer Order Number: DOC-781231=This document contains instructions for installing the Cisco 7010 and Cisco 7505 in an equipmentrack using the rack-mount kit, and for installing the cable management brackets on the Cisco 7010and Cisco 7505.Note When referring to both the Cisco 7505 and Cisco 7010 chassis, the term the chassis will beused.The rack-mount kit provides hardware for mounting the chassis in most standard 19-inch orTelco-type equipment racks. The cable management kit provides two brackets for routing andsecuring network interface cables at the interface processor end of the chassis.Both kits are included with their respective chassis, and each kit is available as a spare part.The sections in this document include the following:• Product Overview, page 2• Prerequisites, page 3• Rack-Mounting the Chassis, page 7• Installing the Cable Management Brackets, page 12• Cisco Information Online, page 13