Cisco EX90 Installation Manual

Also see for EX90: Getting started guide User guide User guide Administrator's guide Quick reference guide

EX90 is delivered with:• EX90 unit• Touch screen with cable• Handset base with cable• Handset• AC adapter and powercable• Screwdriver• Cleaning clothCables:• DVI-D to DVI-I cable(recommended for optimalPC image quality)• VGA to DVI-I cable• Stereo audio cable 3.5 mm• Ethernet cableUser documentationThe user documentation for thisproduct, including compliance andsafety information, is found on theCisco web site.Go to: http://www.cisco.com/go/telepresence/docs.1 Unpacking the touch screen and cablesLift out the rectangular boxfrom the package.In the box you will find cables,and another box with thetouch screen and handset.Unpack the touch screen withthe handset and handset base.HandsetHandsetbaseTouchscreenCables2 Unpacking the EX90 unitPlace the package on the floor withbroad side down.Grasp the EX90, surrounded byfoam protection, and pull it out ofthe package.EX90Carefully loosen the foam protection.Lift out the EX90 and place it on afirm surface.Weight: 14 kg / 31 lb78-19788-01 EX90 Installation Guide | December 2010 | © 2010 Cisco Systems, Inc. All rights reserved.Cisco TelePresence System EX90installation guide

/ 2

Related manuals for Cisco EX90