Cisco DX70 Setting Up

Also see for TelePresence DX70: Manual Installation guide User guide Quick reference guide User guide

Cisco DX70 or 80: Setting up for NHS networked use v1.5Please contact vc.support@nhs.net giving the MAC address of any system you wish toregister. The MAC address allows us to set your dial-in number correctly. You will be sent a4-digit PIN number to be used to unlock the screen. This is required for the final part of theset-up.Your DX must have a valid, unused, 10.247.*.* IP address (along with appropriategateway, subnet and DNS settings). If your board uses dedicated network ports for itsvideo conference devices (a specific VLAN) then you must attach your DX to one of thesenetwork ports or ask for the one you intend using it on to be enabled for this purpose.Once this is in place please connect the DX to your network and power it on.N.B. We only allow video devices on this network address range. Your ability to useAndroid apps will be disabled once your device has registered.If you are required to enter a static IP address for your networkyou will probably see a screen saying you are unable to connectto a network. Tap CancelTap Get Started on the first Welcome Screen then tap OK on thenext screen.At the top RHS of the screen you’ll now see 6 small white dots.

/ 2

Related manuals for Cisco TelePresence DX70