Cisco CATALYST MEM-C6K-ATA-1-64M( Installation Note

Also see for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Solution guide Quick reference guide Manual Description Guide

Contents

Corporate Headquarters:© 1999–2005 Cisco Systems, Inc. All rights reserved.Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACatalyst 6500 Series Supervisor Engine Flash PCCard Installation NoteProduct Numbers:MEM-C6K-FLC16M(=)MEM-C6K-FLC24M(=)MEM-C6K-FLC64M(=)MEM-C6K-ATA-1-64M(=)This installation note contains the procedure to install a Flash PC card in the Catalyst 6500 seriessupervisor engines.Note The 64-MB ATA Flash PC card (MEM-C6K-ATA-1-64M) requires Supervisor Engine 2 with ROMMONsoftware release 7.1(1) or later releases. For ROMMON software upgrade details, refer tohttp://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/relnotes/78_13488.htm.The ATA Flash PC card is supported on Catalyst 6500 series switches running Cisco IOS Release12.1(8a)EX or later releases on both the supervisor engine and the Multilayer Switch Feature Card(MSFC).The ATA Flash PC card is supported on Catalyst 6500 series switches running Catalyst softwarerelease 7.5(1) or later releases on the supervisor engine and Cisco IOS on the MSFC.Note The 64-MB linear Flash PC card (MEM-C6K-FLC64M) is supported only on Supervisor Engine 1 andrequires ROMMON software release 5.3(1) or later releases.The 64-MB linear Flash PC card is supported on Catalyst 6500 series switches running Cisco IOSRelease 12.1(13)E4 or later releases on both the supervisor engine and the MSFC.The 64-MB linear Flash PC card is supported on Catalyst 6500 series switches running Catalyst softwarerelease 7.5(1) or later releases on the supervisor engine and Cisco IOS software on the MSFC.