Cisco Catalyst 2810 Series Manual

Also see for 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion: Solution guide Quick reference guide Description Guide Configuration handbook

Contents

Connecting a Terminal to theConsole Port on Catalyst SwitchesDocument ID: 10600ContentsIntroductionBefore You BeginConventionsPrerequisitesIdentifying a Rollover Cable, Straight-through, and Crossover CableConnecting a Terminal to Catalyst 1900/2820, 2900/3500XL, 2940, 2950, 2970, 3550,and 3750 Series SwitchesConnecting to a TerminalConnecting a Terminal to Catalyst 2948G-L3, 4908G-L3, and 4840G Series SwitchesConsole Port PinoutsConnecting a Terminal to Catalyst 2926 and 2926G Series SwitchesCatalyst 2926G Series SwitchConnecting a Terminal to the Catalyst 5000 Supervisor Engine I and II Console PortConfiguring a Terminal for Attachment to the Console PortConnecting a Terminal to the Catalyst 5000 Supervisor Engine III Console PortConfiguring a Terminal for Attachment to the Console PortConnecting a Terminal to the Catalyst 5000 Supervisor Engine II G and III G Consoleand RSFC PortsConsole Port Mode SwitchConfiguring a Terminal for Attachment to the Console or RSFC PortConnecting a Terminal to the Catalyst 4000 Supervisor Engine I Console PortConnecting a Terminal to the Catalyst 4000/4500 Supervisor Engine II/II+/III/IV,2948G, 2980G, and 4912GCatalyst 6000/6500 Supervisor Engine I, II and 720 Console Port Signals and PinoutsConsole Port Mode SwitchConsole Port Mode 1 Signaling and PinoutsConsole Port Mode 2 Signaling and PinoutsCisco - Connecting a Terminal to the Console Port on Catalyst Switcheshttp://www.cisco.com/warp/public/473/9.html (1 of 19) [9/4/2003 12:36:02 PM]