Cisco ATA 186 Installation And Configuration Manual

Also see for ATA 186: Administrator's guide Installation and configuration guide Administrator's guide Administrator's guide Configuration

Contents

C H A P T E R2-1Cisco ATA 186 Installation and Configuration GuideOL-1267-012Installing the Cisco ATA 186This chapter provides information about installing the Cisco ATA 186.English is the default language. For information on the upgrade process, seeChapter 6, “Upgrading the Cisco ATA 186 Software.”Installation OverviewThe general steps necessary to install the Cisco ATA 186 are:1. Plan the network and Cisco ATA 186 configuration.2. Install the Ethernet connection.3. Install and configure the other network devices; for example, gatekeeper ifyou are using H.323 or proxy server if you are using SIP.4. If you will be routing calls through the Public Switched Telephone Network(PSTN), install and configure the Gateway.5. Install the Cisco ATA 186.6. Configure the Cisco ATA 186.7. Perform any troubleshooting and maintenance, including upgrading thesoftware if necessary.