Cisco ASA 5506-X Mount The Chassis

Also see for ASA 5506-X: Easy setup guide Configuration guide Software guide Quick start guide Hardware installation guide

Mount the ChassisDo not remove the rubber feet included with the ASA because they are needed for proper cooling for allmounting orientations.Note• Desktop-Mount the Chassis, on page 1• Wall-Mount the Chassis, on page 2• Rack-Mount the Chassis, on page 3• Install the ASA 5506H-X in a DIN Rail, on page 8Desktop-Mount the ChassisYou can mount the chassis on a desktop by placing it on a desk in a horizontal position. Make sure there areno blockages or obstructions within one inch of the top of the chassis or within .5 inch of the sides and back,so that nothing interferes with cooling. Do not remove the rubber feet included with the chassis. They are alsoneeded for proper cooling.Do not stack the chassis on top of another chassis. If you stack the units, they will overheat, which causes theunits to power cycle.CautionMount the Chassis1