Cisco ASA 5506-X Quick Start Manual

Also see for ASA 5506-X: Easy setup guide Configuration guide Software guide Quick start guide Hardware installation guide

Contents

package contents

Cisco Systems, Inc. www.cisco.com1Cisco Firepower Threat Defense for theASA 5506-X Series Using FirepowerDevice Manager Quick Start GuideFirst Published: August 10, 2016Last Updated: June 28, 20171. Is This Guide for You?This guide explains how to complete the initial configuration of your Firepower Threat Defense device using theFirepower Device Manager web-based device setup wizard included on Firepower Threat Defense devices.Firepower Device Manager lets you configure the basic features of the software that are most commonly used forsmall networks. It is especially designed for networks that include a single device or just a few, where you do notwant to use a high-powered multiple-device manager to control a large network containing many FirepowerThreat Defense devices.If you are managing large numbers of devices, or if you want to use the more complex features and configurationsthat Firepower Threat Defense allows, use the Firepower Management Center to configure your devices insteadof the integrated Firepower Device Manager.Use the CLI setup wizard to configure your Firepower Threat Defense device for network connectivity and toregister the device to a Firepower Management Center as described in http://www.cisco.com/go/ftd-asa-quick.2. Package ContentsThis section lists the package contents of the chassis. Note that contents are subject to change, and your exactcontents might contain additional or fewer items.Figure 1 ASA 5506-X and 5506W-X353663132 4